学術論文
[1] Tohru Sugahara, Yukiko Hirose, Jun-ichi Nakamura, Takao Ono, Takafumi Uemura, Makoto Karakawa, Toshio Itoh, Woosuck Shin, Yang Yang, Nobuyuki Harada, and Katsuaki Suganuma, "Carrier-Type Switching with Gas Detection Using a Low-Impedance Hybrid Sensor of 2d Graphene Layer and Moox Nanorod 3d Network," ACS Applied Engineering Materials, March 2023.
[2] Rei Kawabata, Teppei Araki, Mihoko Akiyama, Takafumi Uemura, Tianxu Wu, Hirotaka Koga, Yusuke Okabe, Yuki Noda, Shuichi Tsuruta, Shintaro Izumi, Masaya Nogi, Katsuaki Suganuma, and Tsuyoshi Sekitani, "Stretchable Printed Circuit Board Integrated with Ag-Nanowire-Based Electrodes and Organic Transistors Toward Imperceptible Electrophysiological Sensing," Flexible and Printed Electronics, volume 7, number 4, page 044002 December 2022.
[3] Teppei Araki, Jaap M J den Toonder, Katsuaki Suganuma, Takafumi Uemura, Yuki Noda, Shusuke Yoshimoto, Shintaro Izumi, and Tsuyoshi Sekitani, "Non-Contact Laser Printing of Ag Nanowire-Based Electrode with Photodegradable Polymers," Journal of Photopolymer Science and Technology, volume 32, number 3, pages 429-434 June 2019.
[4] Teppei Araki, Rajesh Mandamparambil, Dirk van Bragt, Jinting Jiu, Hirotaka Koga, Jeroen van den Brand, Tsuyoshi Sekitani, Jaap den Toonder, and Katsuaki Suganuma, "Stretchable and Transparent Electrodes Based on Pattered Silver Nanowire by Laser-Induced Forward Transfer for Non-Contacted Printing Technique," Nanotechnology, 27 (45), 45LT02 (8 pages), October 2016.
[5] Su Dinga, Jinting Jiu, Yue Gao, Yanhong Tian, Teppei Araki, Tohru Sugahara, Shijo Nagao, Masaya Nogi, Hirotaka Koga, Katsuaki Suganuma, and Hiroshi Uchida, "One-Step Fabrication of Stretchable Copper Nanowire Conductors by a Fast Photonic Sintering Technique and Its Application in Wearable Devices," ACS Applied Materials and Interfaces, volume 8, number 9, pages 6190-6199 March 2016.
[6] Yang Yang, Su Ding, Teppei Araki, Jinting Jiu, Tohru Sugahara, Jun Wang, Jan Vanfleteren, Tsuyoshi Sekitani, and Katsuaki Suganuma, "Facile Fabrication of Stretchable Ag Nanowires/Polyurethane Electrode Based on High Intensity Pulsed Light Technique," Nano Research, volume 9, pages 401-414 February 2016.
[7] Chunhui Wu, Jinting Jiu, Teppei Araki, Hirotaka Koga, Tsuyoshi Sekitani, Hao Wang, and Katsuaki Suganuma, "Rapid Self-Assembly of Ultrathin Graphene Oxide Film and Application to Silver Nanowire Flexible Transparent Electrodes," RSC Advances, pages 15838-15845 2016.
[8] Jun Wang, Jinting Jiu, Teppei Araki, Masaya Nogi, Tohru Sugahara, Shijo Nagao, Hirotaka Koga, Peng He, and Katsuaki Suganuma, "Silver Nanowire Electrodes: Conductivity Improvement Without Post-Treatment and Application in Capacitive Pressure Sensors," Nano-Micro Letters, volume 7, number 1, pages 51-58 November 2014.
[9] Teppei Araki, Jinting Jiu, Masaya Nogi, Hirotaka Koga, Shijo Nagao, Tohru Sugahara, and Katsuaki Suganuma, "Low Haze Transparent Electrodes and Highly Conducting Air Dried Films with Ultra-Long Silver Nanowires Synthesized by One-Step Polyol Method," Nano Research, 7 (2), pp.236-245, February 2014.
[10] Jinting Jiu, Teppei Araki, Jun Wang, Masaya Nogi, Tohru Sugahara, Shijo Nagao, Hirotaka Koga, Katsuaki Suganuma, Eri Nakazawa, Masanao Hara, Hiroshi Uchida, and Kenji Shinozaki, "Facile Synthesis of Very-Long Silver Nanowires for Transparent Electrodes," Journal of Materials Chemistry A, 2 (18), pp.6326-6330, February 2014.
[11] Teppei Araki, Tohru Sugahara, Jinting Jiu, Shijo Nagao, Masaya Nogi, Hirotaka Koga, Hiroshi Uchida, Kenji Shinozaki, and Katsuaki Suganuma, "Cu Salt Ink Formulation for Printed Electronics Using Photonic Sintering," Langmuir, 29 (35), pp.11192-11197, August 2013.
[12] Jinting Jiu, Tohru Sugahara, Masaya Nogi, Teppei Araki, Katsuaki Suganuma, Hiroshi Uchida, and Kenji Shinozaki, "High-Intensity Pulse Light Sintering Silver Nanowire Transparent Films on Polymer Substrates: the Effect the Thermal Properties of Substrates on the Performance of Silver Films," Nanoscale, 5 (23), pp.11820-1182, February 2013.
[13] Teppei Araki, Tohru Sugahara, Masaya Nogi, and Katsuaki Suganuma, "Effect of Void Volume and Silver Loading on Strain Response of Electrical Resistance in Silver Flakes/Polyurethane Composite for Stretchable Conductors," Japanese Journal of Applied Physics, 51 (11S), 11PD01 (5 pages), November 2012.
[14] Jinting Jiu, Masaya Nogi, Tohru Sugahara, Takehiro Tokuno, Teppei Araki, Natsuki Komoda, Katsuaki Suganuma, Hiroshi Uchida, and Kenji Shinozaki, "Strongly Adhesive and Flexible Transparent Silver Nanowire Conductive Film Fabricated with High-Intensity Pulsed Light Technique," Journal of Materials Chemistry, 22 (44), pp.23561-23567, September 2012.
[15] Tohru Sugahara, Teppei Araki, Michitaka Otaki, and Katsuaki Suganuma, "Structure and Thermoelectric Properties of Double-Perovskite Oxides: Sr2-xKxFeMoO6," Journal of the Ceramic Society of Japan, 120 (6), pp.211-216, June 2012.
[16] Teppei Araki, Masaya Nogi, Katsuaki Suganuma, Masaro Kogure, and Osamu Kirihara, "Printable and Stretchable Conductive Wirings Comprising Silver Flakes and Elastomer," IEEE Electron Device letters, 32 (10), pp.1424-1426, August 2011.
国際会議（一般講演：口頭）
[1] Rei Kawabata, Teppei Araki, Mihoko Akiyama, Tianxu Wu, Yusuke Okabe, Hirotaka Koga, Takafumi Uemura, Masaya Nogi, Katsuaki Suganuma, and Tsuyoshi Sekitani, "Stretchable Printed Circuit Board and Organic Circuit for Ultra-Flexible Biosignal Sensor," 2022 MRS Fall Meeting & Exhibit, SB12.09, Boston, Massachusetts, USA, 1st December 2022, December 2022.
[2] Yusuke Okabe, Teppei Araki, Hirotaka Koga, Tenkyoku Go, Katsuaki Suganuma, and Masato Akimoto, "Development of Low-Temperature Curable, Flexible Electrical Isotropic Conductive Adhesive," IEEE NANO 2016, Sendai, Japan, August 2016.
[3] Teppei Araki, Jinting Jiu, Tsuyoshi Sekitani, and Katsuaki Suganuma, "Synthesis of Long Silver Nanowires for Flexible Applications Fabricated at Low Temperature," BIT’s 4th Annual World Congress of Advanced Materials (WCAM) -2015, May 2015.
[4] Teppei Araki, Katsunari Sato, Tohru Sugahara, Jinting Jiu, Tsuyoshi Sekitani, and Katsuaki Suganuma, "Wearable Resistance Type Strain Sensor Based on Long Silver Nanowires Syntehsized by One Step Polyol Method," 2015 Materials Research Society (MRS) Spring meeting & exhibit, April 2015.
[5] Teppei Araki, Rajesh Mandamparambil, Iryna Yakimets, Jeroen van den Brand, Masaya Nogi, Hirotaka Koga, Jinting Jiu, Tsuyoshi Sekitani, and Katsuaki Suganuma, "Non-Contact Printing of Silver Nanowires for Stretchable/ Transparent Electrodes," LOPEC 7th International Exhibition and Conference for the Printed Electronics Industry, March 2015.
[6] Teppei Araki, Rajesh Mandamparambil, Iryna Yakimets, Jeroen van den Brand, Masaya Nogi, Hirotaka Koga, Jinting Jiu, Tsuyoshi Sekitani, and Katsuaki Suganuma, "Printed Silver Nanowires Track by Laser Process," The 2014 International Conference on Flexible and Printed Electronics, October 2014.
国際会議（一般講演：ポスター）
[1] Yang Yang, Teppei Araki, Jinting Jiu, Tohru Sugahara, Jan Vanfleteren, Tsuyoshi Sekitani, and Katsuaki Suganuma, "Facile Fabrication of Stretchable Ag Nanowire/Polyurethane Electrodes Using High Intensity Pulsed Light," The worlds premier nanotechnology conference for industry, Leuven, Belgium, May 2016.
国内会議（一般講演：口頭）
[1] 川端玲, 荒木徹平, 秋山実邦子, 呉天旭, 岡部祐輔, 古賀大尚, 植村隆文, 能木雅也, 菅沼克昭, 関谷毅, "超柔軟な生体電位センサ創出にむけたストレッチャブル配線板の開発," 第32回マイクロエレクトロニクスシンポジウム, No. 7C1-2, 大阪公立大学 中百舌鳥キャンパス, 2022年9月7日, 2022年9月.
[2] Yusuke Okabe, Teppei Araki, Hirotaka Koga, Tenkyoku Go, Katsuaki Suganuma, and Masato Akimoto, "Development of Low-Temperature Curable, Flexible Electrical Isotropic Conductive Adhesive," IEEE NANO 2016, August 2016.
著書
[1] Teppei Araki, Rajesh Mandamparambil, Jinting Jiu, Tsuyoshi Sekitani, and Katsuaki Suganuma, "Applications of Printed Silver Nanowires Based on Laser Induces Forward Transfer (Lift)," Wiley-VCH, Nano materials for 2D and 3D printing, 265–273 March 2017.
受賞暦
[1] Rei Kawabata, Teppei Araki, Mihoko Akiyama, Takafumi Uemura, Tianxu Wu, Hirotaka Koga, Yusuke Okabe, Yuki Noda, Shuichi Tsuruta, Shintaro Izumi, Masaya Nogi, Katsuaki Suganuma, , and Tsuyoshi Sekitani, "Most Read," Flexible and Printed Electronics, April 2023.